Quiet Fan Kit for Creality Ender-6 3D printers | Hotend & PSU cooling fan kit
€39.95 – €41.91 inc. VAT
- SEK: 409.00 kr - 429.00 kr
A fan kit with quiet fans for Creality Ender-6 3D-printers.
A fan kit with quiet fans for the Creality Ender-6 3D-printer.
Standard fans on a 3D-printer are very loud. Replacing them with quiet fans make a huge difference! Combine it with a silent mainboard and you will barely hear it running!
1: 40x40x10 24V hotend fan,
1: 60x60x15 PSU (power supply) fan, either 12V or 24V.
Up to 4 UY cable connectors – no soldering needed! (only if you select the UY-connectors as wire connection type).
And installation instructions (read them here!).
We offer JST-XH connectiors for all fans, but if you select it for the Hotend fan you will need to extend the fan wires (cut them, add extension in the middle)! The wires are too short otherwise.
A guide on how to install the fans and how to use the buck converter can be found here! It is for the CR-6 SE but the process is the same.
Measure the voltage on your PSU fan (or read the stock fan’s label) to see if it is either 12V or 24V before ordering! A 24V PSU can have a 12V fan!
|Fan||Size (cm)||Manufacturer||Voltage||Type||CFM||Noise (dB)||RPM||Current (A)||Lifetime (h)||Wire length (cm)|
|Hotend fan||40x40x10||Orion Fans||24V||Ball||6||20||4800||0,04||60000 (45°C)||28|
|12V Power Supply fan||60x60x15||Sunon Fans||12V||Vapo-Bearing™||18||21||3000||0,048||70000 (40°C)||28|
|24V Power Supply fan||60x60x15||NMB Technologies||24V||Ball||7||19||1800||0,04||70000 (25°C)||23|
The kit includes four UY cable connectors. No soldering is necessary to install the new fans.
For the best and most quiet result, we recommend removing (cutting off) the fan grill in front of the hotend fan!
|Dimensions||18 × 14 × 3 cm|
|Country of Origin (COO)||